Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There is removal of the cream from the glass after every 10-20 minutes that have passed for every direction it came with. Excess creams are wiped out using paper towels and the hands properly washed prior to taking off the gloves. Proper hand washing ensures no traces of the chemicals are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There is removal of the cream from the glass after every 10-20 minutes that have passed for every direction it came with. Excess creams are wiped out using paper towels and the hands properly washed prior to taking off the gloves. Proper hand washing ensures no traces of the chemicals are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
Tidak ada komentar:
Posting Komentar